V Drive Hondo Drag Boat 489 Big Block Chevy

Ya, my bad if I trash talked your boat. Sorry. I tend to be hard on jet guys as our locally are mostly jets and thy might as well be monkeys wielding adjustable wrenches in one hand and bananas in the other, can't keep engines together or break 55mph. I shouldn't judge all based on these goofs.

Sorry, nobody likes to have their boat dished. We all know the time and effort and maintenance that goes on to these things. For the record my pops use to race a flatly, cole TR2, just made the switch to a jet, that's all. Few months make u made a comment I didn't care for. Barely noticed. That's all it was about

What our gps and accelerometers told us. And btw, I repaired the hull and put every nut and bolt into it including the engine build and fab work. Bring yours out and we'll make a few passes.

Well Scott, I'm not sure what you're talking about , however I have occasionally tipped the bottle and said stupid shit on YouTube. Who hasn't. That's

U dumbass talkin crap about the placecraft, this is what u have??? Really?? Ur flatly may run a 10 flat at best. Just another typical fatty that anybody can buy.

2 blade, 11 1/4 x 15, 22% overdrive gears spinning 7400(engine)RPM out the 1/4... 114-115MPH was a more accurate speed after the rivers current is taken into account, and was seen regularly on a handheld GPS... as you can tell I need to get a touch less slip on the hole shot, it would come right up to 7200, then settle down to mid 6000's once it took a set...looking at gear/prop combos to hold the new 598 around 6700 RPM out the quarter... looking for good all performance not every last tenth...

whats the gear and prop ? 118 MPH IS HALLING ASS ON WATER .. looks cool ....

Great sound

happy birthday! and she uses about 3 gallons per mile at full throttle...putting a hilborn mechanical injection on next season should be even worse!

You posted this on my birthday.. so, where's mine!? Nice hull, great engine. How many gallons per mile??