5m 29sLength

Exceed Racing Electric Fiberglass Catamaran, 650mm Modifications - Added Carbon / Kevlar to the sponsons and center motor and battery tray area. Used System Three epoxy with #2 hardener, with additional water pickup on Starboard side. - All scale RC boats need a scale driver figure! Had to give him a flat top to fit. Built a small cockpit with 1/8" ply used Marine goop to glue to inside of canopy. - Custom Swiss livery graphics with sponsorship from Marine Specialties, Graupner Modellbau. Specs - Turnigy 2860 2700kv motor from HK, with 28x58mm water cooling jacket from OSE. - Turnigy Marine 120A ESC, Graupner 658 BB MG digital servo, Airtronics / Sanwa MX-V 3-channel radio. - Battery: Zippy 3S1P, 4000mAh, 20C with 4mm connectors. Filmed at Arrowhead Lake, Milton, Vermont. Maiden voyage test with stock 432/3 carbon prop. Weight bias is on port side with ESC, handles best counter-clockwise with weight on inside. Plan to make adjustments on trim settings, strut and try different props—436 CNC, TFL 436/3, balanced. Full build thread with photos on http://www.rumrunnerracing.com/feforums/showthread.php?p=294003#post294003 Exceed Racing Electric Catamaran vailable from http://www.nitrorcx.com