Comments
-
Take a look at the video titled "Cutting Vinyl and Coroplast with a Donek Drag Knife". You'll also find videos on performing marquetry as well as a huge variety of other applications.
-
What about cutting curves and detail? This demo shows a very simple cut pattern using straight lines...
-
I will produce some videos this summer on budget vacuum hold down systems and how to make them work for an extremely wide array of applications.
-
We use vacuum hold down on our machine. Our Vacuum hold down is powered with a 1X1 shopvac available from walmart for $25. It is in essence a reinforced box (15in wide X 96in long) with 3/8in holes on 1in centers. When cutting something as thin as paper, it's necessary to decrease the hole size. In this example we placed a thin piece of ABS plastic (0.030in thick) over the vacuum table and drilled 1/8in holes where the 3/8in holse are, thus reducing the hole size.
-
Could you explain how the paper is heald down for cutting?
2m 12sLength
Demonstration of the Donek Drag Knife being used to cut paper.