6m 28sLength

CON-O Precision contour burning and beveling machine, from BUG-O, efficiently produces elliptical cuts and bevels in pipe and cylinders. With a center punch mark on the pipe or cylinder where a hole is to be cut, place the machine's centering pin on the center punch mark, leveled, position is held by outboard magnets then set torch to the radius (and angle if required) of the hole to be cut. Ignite the torch, pierce the material and start the machine and a perfectly contoured hole is the result. Available in three sizes, with each size cutting a range of contour holes, CON-3 cuts 3" to 14" diameter holes, CON-4 cuts 10" to 22" diameter holes and Con-5 cuts 18" to 30" diameter holes. The smallest diameter pipe any CON-O can be mounted to is 12" and the maximum hole size relative to pipe diameter is 2/3 the pipe diameter. (Example: on a 24" diameter pipe the largest hole diameter that can be cut would be 16").