After unboxing the Eastwood Versa-Cut 40 plasma cutter I thought it would only be appropriate for me to show you how I set it up and made my first cuts with it.
In this live video Randy and Cody Go over Eastwood's Line of Plasma Cutters from Eastwood including the Versa-Cut 20, 40, and 60. They also show us some ...
Buy It Here: http://www.eastwood.com/eastwood-plasma-cutter.html?SRCCODE=GA250120 The Eastwood Versa-Cut Plasma Cutter easily slices through ...
Here is a video where I unbox the Eastwood Versa-Cut 40 plasma cutter that I just purchased. When I was looking at buying one I couldn't find anything that laid ...
BUY It Here: http://www.eastwood.com/eastwood-plasma-cutter.html Matt shows how easily and quickly you can be cutting metal up to 3/8 thick with the ...
Learn how and when to replace consumables on your Versa Cut Plasma Cutter. In this LIVE video Matt goes over the Versa Cut 60 consumables and common ...
BUY The Plasma: http://www.eastwood.com/eastwood-plasma-cutter.html?SRCCODE=GA250120 Kevin Oeste and Crew From V8TV Review Eastwood Plasma ...
Fragram Cut 40 Plasma Cutter Instructions How to Cut out Skull Cole Tool Centre Cairns suitable DIY Home workshop, Trade, Artist.
Hitting that Subscribe and Like button Is always much appreciated! Let me know what you think in the Comment section below. Finally pulled the trigger and ...
Review and test cutting thick steel with the Versa Cut 60 plasma cutter from Eastwood. 1/8" up to 1" thick. This is a 220v unit. I have almost no previous plasma ...
This was our First Attempt with the Eastwood Versa-Cut 60 Plasma Cutter Item #14099. We were cutting up a 1988 Corvette Donor car that we were parting out.
This is a product review for the Eastwood Plasma 60 Plasma Cutter. Disclaimer: I work for Eastwood, I was not paid by Eastwood for doing this review, this is my ...
In this video Randy and Cody show different Plasma cutter options offered by Eastwood. They showcase the Versa Cut 60 cutting everything from 3/16 aluminum ...
Versa-Cut Plasma Cutter Eastwood 12740 110 220 volt http://www.jegs.com/i/Eastwood/352/12740/10002/-1 Versa-Cut Plasma Cutter 110 or 220 Volt 140 Volts ...
Matt demonstrates how to build your own DIY Fab Table for a fraction of the cost of a pre-assembled table. He uses the Eastwood MIG 175 welder, Versa-Cut 40 ...
http://www.cjponyparts.com/eastwood-plasma-cutter-versa-cut-20/p/EWPC3/ This Eastwood Versa-Cut 20 Plasma Cutter is if you're looking for an easy way to ...
In this installment of R&D Corner with Mark, he shows you the features and benefits of not only the Versa-Cut 40 Plasma Cutter, but also some must-have ...
LINK to BUY Versa-Cut 60: http://www.eastwood.com/versa-cut-60-plasma-cutter.html Versa Cut 60 Plasma Cutter Item #14099 220 volt 50 to 60Hz, 60 amp ...
Mike Finnegan was in the Hot Rod Garage working on his Drag Boat trailer and cutting some sheet metal with the Eastwood Versa-Cut 60 Plasma Cutter that will ...
Unboxing and setting up the new Eastwood Welder and Plasma cutter.
Buy it Here: http://www.eastwood.com/eastwood-tig-plasma-cart-kit.html Only $1299.99 YOU SAVE $329.98 Save BIG money when you get our TIG 200 Welder ...
From http://www.kevincaron.com - Artist Kevin Caron tries out AHP Tools' new plasma cutter, which surprises him with its metal cutting power, easily cutting ...
Cutting metal from sheet metal up to 1/8" thick, the Versa-Cut it a portable powerhouse! LINK TO BUY: ...
BUY The Combo Deal Here: http://www.eastwood.com/eastwood-tig-plasma-cart-kit.html Components Price: $1629.97 Only $1299.99 YOU SAVE $329.98 Hurry ...
LONGEVITY ForceCut 40D Constant ARC Plasma Cutter! Series 40AMP Dual Voltage Plasma Cutter capable of cutting up to 1/2" thick steel! Compares to and ...
Demonstration of Plasma Cutting with the Cut 40 Plasma Cutter. Demonstrates Plasma Cutting Mild Steel, Stainless Steel and Aluminium as well as the ...
BUY The Plasma Guide Here: http://www.eastwood.com/eastwood-plasma-cutting-guide.html BUY a Plasma Cutter Here: ...
From http://www.kevincaron.com - Artist Kevin Caron reveals your best bet for a clean metal cut using a plasma cutter by comparing amperage and air pressure.
The Plasma Cutter Cut40 that i bought x months ago from ebay had developed a fault where it would only work if you wiggled the wire leading into the hand unit.
One man's review of Eastwood ' s plasma cutter.
A plasma arc cuts through steel fast. Simple in concept, the plasma cutter is not trivial to use expertly. Steve has become an expert in plasma cutter use and in ...
This video takes a look at the Plasma Cutter. It demonstrates set up and operation of a Plasma Cutter. It starts off discussing the importance of keeping moisture ...
Cutting through 1 inch mild steel with the Everlast Powerpro 3 in one 256s plasma, stick, TIG welder set at the max of 60 amps (60% duty cycle at 60 amps).