mini laser cutting mechine support dxf file,you can design in CAD cut it out with this mechine,also it can do engraving craving.......
2015 the newest DIY laser engraving machine is coming. 30X40cm ultra large engraving area. gantry shape design, no engraving height limitation.
Simple home-built x-y router, z axis can be adjusted manually. 5W 808nm infrared laser diode, 8x8 degrees radiation angle. Focusing optics: 20mm telescope ...
First look at the 10W AS-5 Laser Engraver used for small projects. This laser is a great little tool for engraving wood, plastic and marking certain types of metal ...
2.5W Laser engraver kit from Banggood, laser module defect - never light on.
Please visit http://www.DIY3DTech.com for more information on this and many other projects! As in this episode we will be adding the end-stops and trying a new ...
Laser Cutting Test by "LaserCAT 2000" 5,5W (5500 mW) Diode Laser.
More information please click here:https://www.aliexpress.com/store/1703233/search?origin=y&SearchText=laseraxe+5.5W+machine And official site: ...
Its harder than poplar plywood and it was on 10 mm/sec with 50W of laserpower. So it will be cut 8mm at 5mm/sec too. :P For all who say the chinese lasercutter ...
Low cost High Power blue laser for CNC cutting wood,paper, cardboard, paper, Etching of Anodizing, etching of metals. Small compact units run on 12VDC vie ...
Sunwin 30x23cm 5500mw 5.5w 2800mw 2.8w Laser Engraving Cutting Machine DIY Wood Logo Print Engraver (30X23CM 5500mW 5.5W) click here ...
DPSS laser 532nm 5w high power green laser cutting test Link: ...
Cheap laser engraver made from stuff most hobbyists already have on the shelf. At least I did. Visit my instructable page at ...
Laser cutting shapes in black paper with Focus. All cuts done with 2 1,5W 808nm lasers. Find out more about focus here: ...
Cutting with a laser on my CNC-machine. Feedrate is 95 mm per minute.
Like it? Get one here: http://bit.ly/Laser10W http://www.facebook.com/jzelectric.
All the information is in one of the following links: http://www.amazon.com/dp/B014V142SE ...
Laser cutting acrylic with the 2.8W laser upgrade kit available at www.jtechphotonics.com. Cut at 120mm/min with 4 passes, but the last pass was not needed (it ...
This is the first and only single diode 445nm laser that can output 5.5 Watts all day long. It took a whole month and most of my nerves to cook up. Soon it will be ...
Apresentação da máquina laser recorrendo ao software Benbox. Lógica da Mecatrónica.
Part 1 of DIY Chinese CNC laser cutter build. My cutter is branded "eleks maker" and has a 5500mw laser. Part1 is just general blah blah, if you are thinking ...
The New DIY laser engraving machine assembling kits is coming in 2015. With 30X40cm ultra large engraving area, gantry shape design, no engraving height ...
Cutting aluminum paper, with high power laser pointer. (1,5w) Focused beam.
With a 2 Watt 450Nm blue laser you can engrave glass. (skip to 1:35 for the mirror) The only thing you have to do is make the glass (or mirror back side) sensitive ...
Laser engraving Banggood Defect control board motors not powered, no laser light.
Test of 2.5 Watt diode laser module from Banggood.com. Used a 2X4 target, Popsicle stick would burst into flame. Needed something more robust. Hole in wood ...
Laser cutting test with plywood (2,5mm) by diode laser engraver cutter. Лазерная разка фанеры (2,5mm) диодным лазерным резаком.
445nm 5 5W 5500mW Blue Laser Module With Heatsink For DIY Laser Cutter Engrave. Find complete and helpful reviews, click here ...
I have got a 1000 mW blue laser from Banggood.com. In this video I show how I put it on my small CNC machine. Links to the project: Thingiverse link: ...