Comments
-
how do you engrave with powercut software
-
Do you use What Software to control cut and engrave?
-
So we have these but no laser guns yet?
-
Thank you Liu. For 1. engraving granite 2. engraving acrylic 5-6mm 3. cutting the acrylic above after engraving. A) what laser do you recommend power and type (Chinese vs Synrad) and settings (power and speed?). I have tested 130w for photo engraving on granite and quality is no way close to metal laser. Am I missing the conversion method using photoshop (Grayslake, bitmap, round). is there another setting on Rd cam after importing bitmap into it? appreciate your assistance.
-
Hello Liu. Currently researching at the moment.
1. What is a typical thickness of acrylic that can be used for signage 600mm x 900mm used by your existing customers?
2. What is a good power for engraving on acrylic?
3. Is 10w for 1mm thickness - a good ratio for cutting acrylic? Is that similar to your experience?
4. For outdoor use, a trademark acrylic called plexiglas can be used. Is the ratio 10W:1mm thickness still same for cutting or more power due to hardness?
5. You replied below 80w can cut 13mm thick acrylic? Is this possible?
6. What is your experience between RECI vs Synrad laser?
Thanks in advance Liu -
Hello,
Can any of your lasers engrave onto anodized aluminum oxided steel? Love the effect you are getting in this video. -
HI Liu,
Very good video. Could you share laserworks file with me. I'll apreciated. -
Hi Liu,
which the maximum thickness of acrylic can cut with this laser?
4m 25sLength
RECI 80w S2 laser tube engrave at 400mm/s 20% power Cut at 22mm/s 85% power 600x900mm work range. Material is 4mm acrylic instantlx@gmail.com Skype: instantlx Laser Machine catalog: https://drive.google.com/file/d/0B02kv_IyF4YULUdjVUJmYVZIdWs/view?usp=sharing