Comments
-
Hi ! Did you test it on carbon fiber ? thanks !
-
WOW This Little Gun IS a Game Changer !!!
Love it :-) -
I have bought many things from Fibre Glast. Always had a good experience. But yes a product video would be way better if it actually demonstrated the product.
-
Very poor video. Show the gun actually working. That is the purpose of these videos.
-
a demo would have been helpful.
-
+Bill Boomer That is correct, this gun does not spray resin.
-
So,this chop gun doesn't spray out resin while chopping?
Click here to see this product & more on Fibreglast.com: http://bit.ly/1hEtlwk Quick Glass Build Up Our 1171 is a hand held, variable speed air powered chopper gun that is primarily used for coating molds or parts with fiberglass or carbon fiber reinforcement. Continuous glass roving is fed into the rear of the gun. The gun then chops the roving into short pieces and deposits them onto the mold. Resin is then applied by brush, roller or sprayed on using a cup gun. By altering the number and location of chopper blades, the length of the fibers can be varied from 4" down to 5/16". This gun will deposit the equivalent of one layer of 1 oz mat onto a vertical surface without fall-off before wet-out. Ideally suited to quick mold or part build-up once the first layer or two are in place. Use a fiberglass saturation roller to remove trapped air. New design increases cutter head surface by 32% and increased quantity of chopped material between blade replacements by 33%. Our 1171 chopper gun is compatible with our #522 Gun Roving and #2293 24K Carbon Tow.